APX 6000

CTC-1-APX: The CTC-1-APX is a replacement OEM Single Unit Charger. The CTC-1-APX features A/C Plug Adapter, Replaceable Adapter Cups and 12 month warranty. Our CTC-1-APX charger is NON Impres, but will charge Impres and Non Impres batteries The CTC-1-APX replaces NNTN8860A, NNTN8860, WPLN7080 and WPLN7079

CTCM-10-APX: The CTCM-10-APX is a replacement OEM Six Unit Charger. The CTCM-10-APX features A/C Plug Adapter, Replaceable Adapter Cups and 12 month warranty. Our CTCM-10-APX charger is NON Impres, but will charge Impres and Non Impres batteries The CTCM-10-APX replaces NNTN8844

CTCM-6-APX: The CTCM-6-APX is a replacement OEM Six Unit Charger. The CTCM-6-APX features A/C Plug Adapter, Replaceable Adapter Cups and 12 month warranty. Our CTCM-6-APX charger is NON Impres, but will charge Impres and Non Impres batteries The CTCM-6-APX replaces NNTN8844

Motorola 0105954U29, 0105954U29: The 0105954U29 Motorola Acoustic Ear Tube comes with Rubber Mushroom Eartip, Clothing Clip and Acoustical Coiled Tube  

The 0378372A01 Motorola Thumb Screw is the replacement Screw for the APX and XPR Speaker Mics

Motorola 1505596Z02, 1505596Z02: The 1505596Z02 Motorola Strap for extending sizes larger than 40 Inches. This strap is compatible with HLN6602A Chest Pack and RLN4570A Break A Way Chest Pack  

Motorola 1575250H01, 1575250H01: The 1575250H01 Motorola Dust Cover is the Accessory Port Cover

Motorola 2580600E05, 2580600E05: The 2580600E05 Motorola Transformer features 120V, (US) Plug and the ability to utilize the Travel Charger in your vehicle or by pluging into a wall outlet. The 2580600E05 is the TRANSFORMER ONLY. The Travel Charger DC Cord plugs into the AC Transformer Cord

Motorola 30009402001: The 30009402001 Motorola Standard Temperature replacement cable for the Xtreme Remote Speaker Mic's NNTN8203A, NNTN8203ABLK, NNTN8203AYLW  

Motorola 30009402002 XE RSM Extreme Temperature replacement cable. The Xtreme Temperature Cable is formulated with a proprietary blend of materials that offers a significantly higher jacket material melting temperature than the standard cable

Motorola 3087791G01: The 3087791G01 Motorola Power Supply Cord features 120V US Plug and will fit several multi unit chargers    

Motorola 3578010A01, 3578010A01: The 3578010A01 Motorola Windscreen is made of soft foam and used on boom microphones to block out wind. The 3578010A01 will work with many different headsets and radio models

Motorola 3675581B01, 3675581B01: The 3675581B01 Motorola Volume Control Knob  

Motorola 4280384F89, 4280384F89: The 4280384F89 Motorola Extension Belt allows for the extension of the waist belts of the RadioPak and Chest Packs and is Designed for waists larger than 40 inches. The 4280384F89 Belt Extender fits RLN4815A Waist Pack, HLN6602 Universal Radio Pack and RLN4570 Break-A-Way Chest Pack  

Motorola 5080370E97, 5080370E97: The 5080370E97 Motorola Eartips features Color Clear, Soft Rubber and is designed to attach/replace the eartip on the acoustical coiled ear tube  

Motorola 5080384F72, 5080384F72: The 5080384F72 Motorola Ear Plugs features Pack of 50, Attenuating Plug, Color Yellow, High Noise Protection, Rated 24dB and will fit on most Acoustical Coiled Earpiece's in place of the Mushroom tip  

Motorola 67009254001, 67009254001: The 67009254001 Motorola Replacement Rubber Eartip features Soft Rubber, Mushroom Style and fits virtually every Acoustical Coiled Ear Tube. The 67009254001 Also works on the 0105954U29 replacement acoustical ear tube, which works with the RLN6424A Receive only Earpiece  

Motorola AARLN4885B, AARLN4885: The AARLN4885B Motorola Earpiece features Ear Bud Style, 3.5mm Plug and Coiled Cord Will fit all remote speaker mics that have a 3.5mm accessory port

The AY000223A01 Radio Strap Features, Length 56", 1 1/4 Wide, Heavy Duty Leather, RSM Hang-Up-Clip, Positive Locking Buckle, Mates to a Carry Case via Rust Free Scissor Snaps. Approved for APX and MOTOTRBO Radios

The AY000229A01 Radio Strap Features, Length 64", 1 1/4 Wide, Heavy Duty Leather, RSM Hang-Up-Clip, Positive Locking Buckle, Mates to a Carry Case via Rust Free Scissor Snaps. Approved for APX and MOTOTRBO Radios

Motorola BDN6668A, BDN6668A, BDN6668: The BDN6668A Motorola Surveillance Kit features Color Beige, Soft Earloop Style, Clothing Clip, Mushroom Tip, 3 Wires, One Wire for Mic, One Wire for PTT, One Wire for Earpiece and 3.5mm Threaded Plug

Motorola BDN6668B, BDN6668B: The BDN6668B Motorola Surveillance Kit features Color Beige, Soft Earloop Style, Clothing Clip, Mushroom Tip, 3 Wires, One Wire for Mic, One Wire for PTT, One Wire for Earpiece and 3.5mm Threaded Plug

Motorola BDN6669A, BDN6669A , BDN6669 : The BDN6669A Motorola Surveillance Kit features Color Beige, Soft Ear Loop Style, Mushroom Tip, Clothing Clip, Extra Loud Audio, 2 Wires, One for Mic & PTT, One for Earpiece and 3.5mm Threaded Plug

Motorola BDN6726A, BDN6726A, BDN6726: The BDN6726A Motorola Surveillance Earpiece features Color Black, 1 Wire, Receive Only, Soft Earloop Style and 3.5mm Threaded Plug

Motorola BDN6730A, BDN6730A, BDN6730: The BDN6730A Motorola Surveillance Kit features Color Black, Soft Earloop Style, Mushroom Tip, 3 Wires, One Wire for Earloop, One Wire for Mic, One Wire for PTT, Clothing Clip and 3.5mm Threaded Plug

Motorola BDN6731A, BDN6731A, BDN6731: The BDN6731A Motorola Surveillance Kit features Color Black, Clothing Clip, Soft Earloop Style, Extra Loud Audio, Mushroom Tip, 2 Wires, One Wire for Mic/PTT, One Wire for Earloop and 3.5mm Threaded Plug

Motorola BDN6783B, BDN6783B, BDN6783A, BDN6783: The BDN6783A Motorola Adapter features Threaded 3.5mm Port, Port Cover, Quick Disconnect and PTT  

The  FAF5259A Antenna  is UHF/GPS, R1, 380-470 mHz, 1/4 Wave, (Length 9.3CM). Radio not included

Motorola FAF5260A, FAF5260A, FAF5260: The FAF5260A Motorola Antenna features UHF Band, GPS, Stubby Style, Range 2, 470-520 MHz and Single Band

Motorola HLN6602A, HLN6602A, HLN6602: The HLN6602A Motorola Chest Pack features Pen Holder and Velcro Secured Pouch. This item will fit virtually every radio model which some may not be listed here  

Motorola HLN6875A, HLN6875A, HLN6875: The HLN6875A Motorola Belt Clip features Hard Plastic, 3" Spring Action Belt Clip and connects to your XTS battery or APX Top Display Models. Important Note (Only works with APX Top Display Models not Full Display)  

Motorola NAF5085A 700-800MHz, Digital Band Antenna for APX Radio series. Designed with GPS and Optimum length for higher gain to maximize your range

Motorola NAG4000A, NAG4000A, NAG4000: The NAG4000A Motorola Antenna features Stubby Style, GPS and is approximately 3"  

Motorola NAR6593A VHF, 136-174MHz APX radio antenna. Length 7.75  

Motorola NAR6594A Dual Band Antenna. VHF 136-174MHz, and 700-800 Digital and has GPS. Radio not included  

Motorola NAR6595A, NAR6595A, NAR6595: The NAR6595A Motorola Antenna features Digital Band, 700-800 MHz, Stubby, GPS and Approximate length 3.25 inches  

Motorola NKN6510A, NKN6510A, NKN6510: The NKN6510A Motorola Cable features 2 Wires, Palm PTT, Connects to the CommPort and Radio Adapter. The NKN6510 Palm PTT works with BDN6783, BDN6676 and AAHLN9717 Adapters  

Motorola NKN6512A, NKN6512A, NKN6512: The NKN6512A Motorola Cable features 2 Wires, Ring PTT, Connects to the CommPort and Radio Adapter. The NKN6512A Ring PTT works with BDN6783, BDN6676 and AAHLN9717 Adapters  

The NKN6611A is the replacement cable for the NMN6271, NMN6272, NMN6273 remote speaker mics

The NLN7967A Motorola Mounting Bracket features Easy Assembly, Comes with screws. Will fit most Motorola Multi Unit Chargers The NLN7967A will fit most Motorola Multi Unit Chargers for wall mounting use

Motorola NNTN4188A, NNTN4188A, NNTN4188: The NNTN4188A Motorola Cable features 2 Wires, Body PTT, Connects to the CommPort and Radio Adapter. The NNTN4188A Body PTT works with BDN6783, BDN6676 and AAHLN9717 Adapters  

Motorola NNTN7034B, NNTN7034: The NNTN7034 is NOW Replaced by the PMNN4487A. By ordering this product you will received the PMNN4487A . The NNTN7034B Motorola Battery features Impres Technology, Ruggedized, Rating (IP68), Submersible, 4200mAh, and Lithium Ion  

The NNTN7038B is our replacement for OEM original. The NNTN7038B Battery features (Li-Ion) Lithium Ion, (SHORT BATTERY), 3.07 x 2.34 x 1.65 (HxWxD), 3000mAh, IP67 Rated and is a Non Impres battery. The NNTN7038B is also known as NNTN7038A, NNTN7038, PMNN4486A and PMNN4486 12 Month Warranty

The NNTN7065C is OUR Brand Replacement for the Motorola original charger. Our NNTN7065C features NON Display, NOT IMPRES, Built in Wall Mount, Indicator Lights, Replaceable Charger Cups, Rapid-rate, 6 UNIT, US Plug and Charges All Chemistries. The NNTN7065C is also known as NNTN7065B and NNTN7065. Why pay over $1000.00 for charger when all you want is charged batteries.

The NNTN7073B is our replacement to offer you great savings over the Motorola original charger. The NNTN7073B features 6 Replaceable Charger Cups, Rapid Rate, Built in Wall Mount, Indicator Lights showing status of charge, US Plug, Charges all Chemistries. The NNTN7073B is also known as NNTN7073A and NNTN7073 12 Month Warranty

Our Brand NNTN7079A replacement for the Motorola original charger. Our NNTN7079A is NOT an Impres charger. Our NNTN7079A comes with US PLUG, Replaceable Charger Cup, Indicator Lights shows the current state of the charging process. The NNTN7079A is also known as NNTN7079. Our NNTN7079 will not condition or recalibrate but you can't beat the price. 12 Month Warranty

The NNTN7573 has now been replaced with PMNN4573 with much higher milliamps of 4600mAH. The PMNN4573 is also Rated TIA 4950 UL approved for Intrinsically Safe operation .

Motorola NNTN7686A, NNTN7686: The NNTN7686A Motorola Adapter Cups features the ability to allow the user not have to buy new charging units. The NNTN7686A cups are made to fit into the WPLN4108BR, WPLN4181AR, and WPLN4130A multi unit (6) charger base  

The NNTN7687A Motorola Adapter Cup features the ability to allow the user not have to buy new charging units. The NNTN7687A cup is made to fit into the WPLN4111. The NNTN7687A is also known as NNTN7687

Motorola NNTN7869A, NNTN7869A, NNTN7869: The NNTN7869A Motorola Key Loader features 6 Pin Hirose Adapter to connect to the KVL4000 Keyloader for Programming and can be use with some 6 Pin Surveillance Kits  

Motorola NNTN8294, NNTN8294A, NNTN8294: The Motorola NNTN8294A Motorola Earpiece features Wireless Earbud, 11.5" (29cm) cable, In Line Mic, 3 sizes of Eartips and connects to Pod  

Motorola NNTN8295A, NNTN8295A, NNTN8295: The NNTN8295A Motorola Wireless Earpiece features 45" (116cm) cable, In Line Mic, 3 sizes of Eartips and Locking Plug  

Motorola NNTN8296A, NNTN8296A, NNTN8296: The NNTN8296A Motorola Wireless Kit features 2 sets of 45" 116cm, 2 wire cables 1 White & 1 Black, 1 single-wire Black Earbud Headphone and an Industry Unique 3.5mm Earbud Adapter that allows the Officer to plug in any consumer off-the-shelf headphones  

The NNTN8298A Motorola Wireless Earpiece features 45" (116cm) cable, Two Wire Earbuds, In Line Mic, 3 sizes of Eartips and Locking Plug

Motorola NNTN8299A, NNTN8299A, NNTN8299: The NNTN8299A Motorola Wireless Kit features Eartip Pack. The NNTN8299 are replacement eartips for NNTN8296, NNTN8295 and NNTN8294  

Motorola NNTN8361A, NNTN8361A, NNTN8361: The NNTN8361A Motorola Wireless Kit features 20 Small, 20 Medium, 20 Large Eartips and 10 Clothing Clips. The NNTN8361 are replacement eartips for NNTN8296, NNTN8295 and NNTN8294  

Motorola NNTN8385A, NNTN8385A, NNTN8385: The NNTN8385A Motorola Wireless Neckloop Y-Adapter features Barrel Style Mic, Plug to connect to RLN4920 Neckloop and Plug for connecting to Wireless PTT POD NTN2570 or NTN2571. The RLN4920 Neckloop shown in photo is not included  

The NNTN8434A Motorola Complete Discreet Surveillance Kit features Beige Neckloop and Retention Hook, Beige Y-Adapter, Barrel Mic, Micro USB Charging Wire, Lithium Polymer Battery gives approximately 8 hours of run time, Wireless Discreet Earpiece and NTN2571 PTT POD. This kit requires the separate purchase of the PMLN5792 for XTS Series Radios, PMLN5993 for XPR Series Radios, Please check your APX radios for the blue dot for Bluetooth Ready  

Motorola NNTN8457A, NNTN8457A, NNTN8457: The NNTN8457A Motorola Retention Hook Neckloop Y-Adapter color beige  

The NNTN8749A is a Motorola Button Clip used with the NNTN8271 Clothing Clip. The NNTN8749A Button Clip allows the user the ability to attach to a Boston Leather Firemen's Strap. The NNTN8749 comes as a 5 Pack

Motorola NNTN8844A, NNTN8844A, NNTN8844: The NNTN8844A Motorola Charger features IMPRES 2 Technology, Rapid Rate, 6 Unit, 6 Displays, US Plug, Charges Li-Ion & NiMh. The IMPRES 2 Multi Unit Charger keeps your batteries safer, smarter and powered for longer. IMPRES 2 NNTN8844A chargers feature enhancements, including 100% increase in charge rate, customizable charging process and advaced Diagnostic capability. The NNTN8844A Multi Unit Charger also features six integrated USB charging ports and a shelf designed to clip your radio accessories to while your radio is charging. IMPRES 2 batteries provide increased charge cycles, improved submersibility and higher capacity

The NNTN8860A Motorola Charger features IMPRES 2 Technology, Rapid Rate, Single Unit, 115 AC Only, US Plug, 2 USB Charging Ports, Enable & Disable Calibration Switch, Charges Li-Ion & NiMh. The IMPRES 2 Single Unit Charger keeps your batteries safer, smarter and powered for longer. IMPRES 2 NNTN8860A chargers feature enhancements, including 100% increase in charge rate, customizable charging process and advaced Diagnostic capability. IMPRES 2 batteries provide increased charge cycles, improved submersibility and higher capacity

The NNTN8930A Motorola Battery features IMPRES 2 Technology, Intrinsically Safe (IS), (Li-Ion) Lithium Ion, (SHORT BATTERY), 3.4 x 2.3 x 1.7 (HxWxD), 2650mAh, IP68 Rated. When the NNTN8930A Battery is combined with an IMPRES 2 Charger, can deliver up to 60% more charging cycles than Traditional Lithium Ion batteries. NNTN8930A Impres 2 Batteries are compatible with all existing IMPRES Chargers

Motorola NTN2570C, NTN2570C, NTN2570: The NTN2570C Motorola Wireless Earpiece features 12" cable, FM Approved Intrinsically Safe, Over-the-Ear Style, In-Line Push-to-Talk (PTT), Acoustic Ear Tube and Clothing Clip. Battery power offers approximately 10 hours of run time on a 5/35/60 use. Micro USB Charging connection, Lithium Polymer Battery and has a Maximum Range of 33 feet of operation from radio  

Motorola NTN2571B, NTN2571A, NTN2571: The NTN2571B Motorola Wireless POD features Wireless PTT Pod and Volume Control  

Motorola NTN2572A, NTN2572A, NTN2572: The NTN2572A Motorola Earpiece features 12" cable, FM Approved Intrinsically Safe, Color Black, Over-the-Ear Style, Proprietary Earpiece 2.5mm Connector and the NTN2572A was designed to give First Responders all day comfort  

Motorola NTN2575A, NTN2575A, NTN2575: The NTN2575A Motorola Earpiece features Bluetooth Technology, 9.5" cable, FM Approved Intrinsically Safe, Color Black, Over-the-ear Style, Proprietary Earpiece 2.5mm Connector. The NTN2575A was designed to give First Responders all day comfort  

Motorola NTN5243A, NTN5243A, NTN5243: The NTN5243A Motorola Shoulder Strap features Scissor Locking Clips, Black Nylon, Adjustable and Easily attaches to "D" rings on Holster. As long as your radio cases has the Side Mounted D Rings this strap will work for your case  

Motorola NTN8266B, NTN8266B, NTN8266: The NTN8266B Motorola Belt Clip features Heavy Duty Plastic, 2.5" Spring Action Belt Clip and connects to your XTS battery or APX Top Display Models. Important Note (Only works with APX Top Display Models not Full Display)

Motorola NTN8988A, NTN8988A, NTN8988: The NTN8988A Motorola Ear Straps includes (pack of 10) for secure attachment to ear and works with the CommPort and Mission Critical Wireless Earpiece's  

Motorola NTN9179A, NTN9179A, NTN9179: The NTN9179A Motorola Belt Loop features Hard Leather, Stainless Steel, 3.0" Belt Loop and D Button. The NTN9179 helps to convert you Universal Plastic Carry Holster to a Swivel Case

Motorola NTN9212A, NTN9212A, NTN9212: The NTN9212A Motorola Button features D Style and only fits the NTN9213A 3.0" Belt Loop. This D button connects directly to the battery which eliminates the need for a carry case or a belt clip  

Motorola NTN9213A, NTN9213A, NTN9213: The NTN9213A Motorola Belt Loop features 3" Loop and only works with NTN9212A D Button. This Belt Loop eliminates the need for a full holster  

Motorola PMAE4065A, PMAE4065A, PMAE4065: The PMAE4065A Motorola Antenna features UHF Band, 380-520MHz, GPS and Length 5.5 Inches  

Motorola PMAF4002A Public Safety Mic Digital Antenna. 764-870 MHz. This antenna attaches to the remote speaker mic also known as public safety mic. Do not attach to radio. For GPS location you must purchase the NAG4000A to attach to the radio. Length 3.5 Inches  

The PMAF4022A Antenna features Digital Band, 700/800 MHz, Stubby, 9cm Length

Motorola PMKN4012B, PMKN4012B, PMKN4012A, PMKN4012: The Motorola PMKN4012B Programming Cable is used with the MotoTRBO XPR, APX and SRX Radio Series  

Motorola PMKN4013C, PMKN4013C, PMKN4013A, PMKN4013B, PMKN4013: The PMKN4013C Motorola Programming Cable is for Radio Test and Alignment of the APX, SRX and XPR Radio Series  

Motorola PMKN4107A, PMKN4107 Remote Speaker Microphone Interface Cable. The PMKN4107 cables provide a standard connection point to the remote speaker microphones to third party accessory products. The PMKN4107A is a Male Nexus Plug. These cables are compatible with HMN4104, HMN4103 and HMN4101  

The PMKN4234A Motorola Remote Speaker Mic Replacement Cord includes coiled cord and connector. The PMKN4234A Cable works with the following remote speaker mics: PMMN4025, PMMN4046A, PMMN4062, PMMN4065 and PMMN4069  

The PMLN4620 is a direct repalcement for Motorola Original Earpiece. The PMLN4620 features Coiled Black Cable, Kevlar Coated Wire, 3.5mm Plug and D Style Comfort Earpiece. The PMLN4620 is a 3.5mm plug Non Threaded connector. Will fit all remote speaker mics that have a 3.5mm accessory port

Motorola PMLN5096A, PMLN5096A, PMLN5096: The PMLN5096A Motorola Earpiece features D Style, with Boom Mic and In-Line PTT, Clothing Clip

Motorola PMLN5101A, PMLN5101A, PMLN5101: The PMLN5101A Motorola Temple Transducer features IMPRES Technology, Inline PTT and Noise Cancelling Boom Mic  

The PMLN5275 is a replacement for the OEM Brand. Our PMLN5275 features Heavy Duty Behind the Head Style, 24dB Noise Reduction Rating, Ear Cup PTT, Noise Cancelling Boom Mic, Dual Ear Muff, Flexible Boom Mic, Great for Noisy Environments. The PMLN5275C Can be worn with or without Helmet. The PMLN5275C is also known as PMLN5275, PMLN5275B, PMLN5275A

Motorola PMLN5407A, PMLN5407A, PMLN5407: The PMLN5407A Motorola Belt Loop features Stainless Steel, 2.5" Swivel Belt Loop, Constructed of Hard Leather and will fit carry cases with a swivel belt loop in the APX Radio Series Compatible Cases PMLN5324, PMLN5327, PMLN5330, PMLN5657, PMLN5659, PMLN5875, NNTN8111, NNTN8113, NNTN8115  

Motorola PMLN5409A, PMLN5409A, PMLN5409: The PMLN5409A Motorola Belt Loop features Stainless Steel, 3" Swivel Belt Loop, Constructed of Hard Leather and will fit carry cases with a swivel belt loop in the APX Radio Series Compatible Cases PMLN5324, PMLN5327, PMLN5330, PMLN5657, PMLN5659, PMLN5875, NNTN8111, NNTN8113, NNTN8115  

Motorola PMLN5653A, PMLN5653A, PMLN5653: The PMLN5653A Motorola Earpiece features Bone Conduction, Large PTT, Clothing Clip and Quick Disconnect Face stays unobscured and eliminates the need for a boom mic, voice is picked up directly from the ear canal minimizing ambient noise transmitted. This Unit Does Not Operate in VOX  

Motorola PMLN5657B, PMLN5657B, PMLN5657A, PMLN5657: The PMLN5657B Motorola Carry Case features Hard Leather, 2.75" Swivel Belt Loop, D Rings and Designed to fit all Model I, II, and III APX 6000 Radio Models. Constructed of top-grain leather designed to withstand the harsh conditions of mission critical use. Works with all APX 6000 models and sized to fit NNTN7038, PMNN4403, NNTN8092 batteries  

Motorola PMLN5658B, PMLN5658B, PMLN5658A, PMLN5658: The PMLN5658B Motorola Carry Case features Hard Leather, 3" Fixed Belt Loop, D Rings and Designed for Top Display APX 6000 Radios. Constructed of top-grain leather designed to withstand the harsh conditions of mission critical use. Designed to works with all APX 6000 models and sized to fit NNTN7038, PMNN4403, and NNTN8092 batteries  

Motorola PMLN5659B, PMLN5659B, PMLN5659A, PMLN5659B: The PMLN5659B Motorola Carry Case features Hard Leather, 2.75" Swivel Belt Loop, D Rings and Designed to fit all Model I, II, and III APX 6000 Radio Models. Constructed of top-grain leather designed to withstand the harsh conditions of mission critical use. Works with all APX 6000 models and sized to fit NNTN7033 and NNTN7034 Batteries  

Motorola PMLN5660B, PMLN5660B, PMLN5660A, PMLN5660: The PMLN5660B Motorola Carry Case features Hard Leather, 3" Fixed Belt Loop, D Rings and Designed to Fit Display Model I, II, and III APX 6000 Radios. Constructed of top grain leather designed to withstand the harsh conditions of mission critical use. Works with all APX 6000 models and sized to fit with batteries NNTN7033 and NNTN7034  

MOTOROLA PMLN5709A, PMLN5709A, PMLN5709: The PMLN5709A Motorola Plastic Holder features Sturdy Hard-Plastic, Fits all Battery Sizes, 3" Belt Clip and is designed to protect large display by facing it Inward. The Universal Plastic Holder is designed to support the APX 6000 Dual Display Portable Radio Models 1.5, 2.5, and 3.5